The Harlequin Clip and Channel System

MADE IN NEW ZEALAND, the patented Harlequin clip and channel system can be fitted to any type of panel, or board that accepts screws along its edge and is at least 25mm thick. Panels can be made of any sheet type material or combination - timber, metal, plastic, etc.

 

The steel double slotted channels are screwed onto the sides of the panels or boards to create Screens, Room Dividers, Modular Systems and Display Boards.

 

The clips engage into the channels and can be locked in place with simple off the shelf plastic strips. By utilizing the range of clips (stands, glides, hinges, and inline), screens can stand independently or hinge to another at any angle in the same plane.

 

By using channel attached to a wall, screens can be fitted to a wall. Channel posts also make it possible for screens to be erected off the floor at eye level

 

The Harlequin Screen System is specially designed for simplicity, adaptability, and versatility.

Easy to erect and dismantle.

Easy to move or transport to another location.

When stored they take up as little room as possible.

Screens of different dimensions and constructed of different materials can be linked together at variable heights to each other.

Screens can be refreshed to create a whole new look by unscrewing the channels from one set of panels and fitting them to another or recovering the panels with a different fabric.

Displays can easily be changed by redecorating, or repainting the panels and repositioning the system.

A range of shopfittings could be attached to the screens including shelving.

Clips and Channels are available for purchase separately for those wishing to design
and make up their own screens using the Harlequin System

Modular Display Systems

The rigid panels of the modular display system are only 26 mm wide. Constructed from a laminated sandwich of foam between two thinline sheets of MDF they are firm enough to accept pins or staples but light enough to be easily transportable.

The standard covering is a Velcro receptive fabric.

The frame is manufactured from steel channeling, reinforced and welded at all four corners. This provides strength and stability. Slots in the channeling are precisely positioned which enable modules to be clipped together in a variety of positions.

 

Display modules can be used either vertically or horizontally.

Room Dividers / Screens

The panels of the Room Dividers / Screens are similar to those of the Display Modules and can be covered with a fabric of your choice.
Mounting channels are prefixed to run along two opposite edges of each panel for the full length. Various clips hook into these allowing the panels to stand independently or link together in a wide variety of configurations. They have multiple uses and are ideal as transportable screens or poster display boards for use in offices, reception areas, conference centres, and trade shows.

Customize your own panels

The Customized Panels are similar to the Room Dividers and are not covered with fabric. The raw MDF base is suitable for many types of finishes including paint, paper, fabric, graphics, texture coatings, etc.

These are an ideal choice for marketing products in a retail situation, for sign writing, or to use as changeable backgrounds for shop windows.